BILION BIPAC 5100

Note: This will probably be very similar to other D-Link interfaces:

Type "http://192.168.0.254" in browser to bring up Config Pages

Click onto the "Setup Wizard" button on top left of centre options.

Basics again, make sure Mode is set to "Routing"... PPPOA is set in Encapsulation,
Multiplex is set to "VC" and VPI and VCI are set to 0,38 respectively.

Enter username and password. Choose Nail Up Connection under "Connection" heading.
Network Address Translation should be set to "SUA Only"

Click onto the "Save Settings" button to save details customer has entered...

This will then display the connection status... If incorrect, just click on the "Maintenance" tab at top left of config page.