MC20

Last Updated 26/08/98 21:52
I'm no expert but I have a resonable knowledge of whay  can 
and can't be done with the MC20.
The main  problem  with  the MC20  is  the  fact  that  the 
instructions that are supplied with the radio are in German. 
There  is (if you are very lucky) an English  version - but 
quite a lot is lost in the translation!!
Code Display Reads Meaning

11 reverse sw allows the reversal of the direction of the servo travel

12 throw adjust allows alteration to the amount of servo throw

13 dual rate allows the setting of dual rates

14 exponential allows the setting of exponential servo movement

15 sub trim allows the setting of servo neutral point

16 trace rate

18 idle r. trim allows throttle (brakes) trim to be switched on or off

19 throw limit allows servo movement to be limited (avoids cumulative effects with mixers)

22 diff. rate allows the setting of differential rates

23 switch funct. allows switch functions to be assigned

31 thr/brk midp allows setting of throttle (brake) midpoint

32 model name allows entry of model name

33 switch mix allows allocation of mixer switches

34 switch dr/exp allows assignment of dual rate and exponential switches

35 red. trim allows reduction of trim range

37 inp-port ass allows

41 aile-rudd allows aileron into rudder mixing

42 aile-flap allows aileron into flap mixing

43 v-tail allows v-tail mixing

44 brk-elev allows elevator compensation under braking

45 brk-flap allows brakes to be mixed with flaps

46 brk-aileron allows brake to be mixed with ailerons

47 elev-flap alows elevator to be mixed with flap

48 flap-elevator allows flap to be mixed with elevator

49 flap-aileron allows flaps to be mixed with aileron

Coming Soon - Delayed due to pressure of accademic work
        
Back to features page homepage about us photo album favourite sites
Site created and maintained by Carl Trollope 61 The Chequers Lichfield Staffordshire WS13 6BP
 

Code	Display Reads	Meaning
11	reverse sw	allows the reversal of the direction of the servo travel
12	throw adjust	allows alteration to the amount of servo throw
13	dual rate	allows the setting of dual rates
14	exponential	allows the setting of exponential servo movement
15	sub trim	allows the setting of servo neutral point
16	trace rate
18	idle r. trim	allows throttle (brakes) trim to be switched on or off
19	throw limit	allows servo movement to be limited (avoids cumulative effects with mixers)
22	diff. rate	allows the setting of differential rates
23	switch funct.	allows switch functions to be assigned
31	thr/brk midp	allows setting of throttle (brake) midpoint
32	model name	allows entry of model name
33	switch mix	allows allocation of mixer switches
34	switch dr/exp	allows assignment of dual rate and exponential switches
35	red. trim	allows reduction of trim range
37	inp-port ass	allows
41	aile-rudd	allows aileron into rudder mixing
42	aile-flap	allows aileron into flap mixing
43	v-tail	allows v-tail mixing
44	brk-elev	allows elevator compensation under braking
45	brk-flap	allows brakes to be mixed with flaps
46	brk-aileron	allows brake to be mixed with ailerons
47	elev-flap	alows elevator to be mixed with flap
48	flap-elevator	allows flap to be mixed with elevator
49	flap-aileron	allows flaps to be mixed with aileron